Getting Started; Wireless Sensor; Main Unit Install Backup Battery - Youshiko YC9481 User Manual

GETTING STARTED

WIRELESS SENSOR

1. Remove the battery door.
2. Insert 2 x AA size batteries into the battery compartment. Make sure you insert
them the right way according to the polarity information marked on the battery
compartment.
3. Close the battery door.
NOTE:
- The bundled wireless sensor can receive the Radio controlled clock signal for main unit
auto time setting. Just pair up the sensor with main unit to apply this function.
- Once the channel is assigned to a Wireless Hygro-Thermo sensor, you can only change
it by removing the batteries or resetting the unit.
- Avoid placing the sensor in direct sunlight, rain or snow.

MAIN UNIT INSTALL BACKUP BATTERY

1. Remove the battery door of the main console.
2. Insert the new CR2032 battery as per the polarity information marked on the battery
compartment
3. Close the battery door.
Power up console
1. Plug the power adapter USB plug to
power up the main unit.
2. Once the main unit power up, it will
enter normal time mode.
TABLE STAND INSTALLATION
The unit is designed for desktop or wall mount for easy viewing. follow the steps below to
hook the table stand on the botton of the console.
Step 1
6
USB cable
Step 2