Colour weather station with wireless sensor (18 pages)
Summary of Contents for Youshiko YC9333
Page 1
Youshiko YC9333 Radio Control Weather station...
Page 2
One Step Automatic Set Up: Insert required batteries in weather station display unit, ,Then choose channel number : 1 / 2 / 3 on three supplied sensors , each sensor must have different channel number, then insert batteries in all sensors and wait . All sensors will connect to display unit within 1 to 3 minutes.
Page 3
Features: MSF Radio controlled clock function Radio control function can be switched on and off Time in optional 12/24 hour format Perpetual Calendar Up to Year 2099 Daily Alarm Function Snooze function Low battery indicate ...
Page 4
Appearance descrip on: 1 : 7 :Remote sensor 2 data Weather forecast pa ern and air pressure 2 :Time 8 :Remote sensor 3 data 3 :Date and day of week 9 :Ba ery compartment cover 4 :Remote sensor loca on label :Stand cover 5 :Indoor temperature / humidity / comfort :...
Page 5
A1: Remote sensor temperature Emission symbols A3: Channel number A4: Remote sensor humidity A5: Remote sensor low battery indicate B1: °C /°F unit transfer button B2: Manual transmitter button B3: Channel switch indicating lamp C1: Transmit C2: Battery compartment cover C3: Wall mounting hole C4: Stand cover C5: Battery compartment...
Initial operation: Open the Weather Station battery compartment cover Insert 2 x AA batteries observing polarity [ “+” and “ –“ marks] When you insert the batteries, all icons on the LCD will light up for 3 seconds, and you will hear a beep tone, and then detect indoor temperature &...
Radio reception is weaker in rooms with concrete walls (e.g.: in cellars) and in offices. In such extreme circumstances, place the system close to the window. During the RC receive mode, only the 【Light/SNZ】 and 【-】buttons have a function, other buttons are not functional, If you want to carry out other functions of operation, please press 【-】...
When adjusting the value, press and hold the 【+】or 【-】key to adjust continuously and quickly. Setting the daily alarms: Press once 【 button, LCD will display , press again to display 】 press again to display , each to represent Alarm1ON (Alarm2 OFF), Alarm2 ON (Alarm1 OFF), Alarm1&Alarm2 ON.
next day. Snooze function When the alarm is ringing, press the 【Light/SNZ】 button the alarm mode will to get to snooze mode. The alarm signal sounds again after 8 minutes. RF Transmission Procedure The weather station automatically starts receiving transmission from outdoor remote sensor for outdoor temperature &...
Ice alert The ice alert symbol appears and flashing when the outdoor temperature at –1℃ to + 3℃ or +30.2℉ to + 37.4℉. Weather forecasting function Please take the weather forecast from your local weather forecasting service into account as well as the forecast from your weather station.
Outdoor sensor collect real-time data and weather station track specific weather-related variables, including changes in temperature, humidity, and barometric pressure to produce a forecast with a personalized accuracy for your pin point location ( which may not be same as Sky or BBC news forecast or met office ).
Background lighting Press the 【Light/SNZ】 button, the backlight illuminates for 15 seconds. Battery replacement Use alkaline batteries only. Observe correct polarity, Low batteries should be changed soon to avoid the damage resulting from a leaking battery. Batteries contain harmful acids. Wear protective glasses and gloves when handling with leaked batteries.
Page 13
Declara on of Conformity: Youshiko Ltd hereby declares that the product fully complied to applicable guidelines and corresponding standards and requirements ok UKCA and other relevant provisions of Direc ve 1999/5/EC. LIABILITY DISCLAIMER • Electrical and electronic waste contains hazardous substances. Disposal of electronic waste in open countryside and/or in other unauthorized places greatly damages the environment.
Need help?
Do you have a question about the YC9333 and is the answer not in the manual?
Questions and answers