Table of Contents
Advertisement
Language setting
RCC setting
DST (day light
saving) setting
ALARM TIME SETTING AND DISPLAY
1.
In normal time mode, press and hold [ ALARM ] key for 2 seconds until the alarm
hour digit flashes to enter alarm time setting mode.
Press [ CH / + ] or [ MEM / - ] key to change the value. Press and hold the key for
2.
quick-adjust.
3.
Repeat the above operations to set the alarm time in this order: Hour → Minute.
4.
When you complete the setting of Minute, Press [ ALARM ] key or leave the unit for
60 seconds to return to normal mode.
USING ALARM AND SNOOZE FUNCTION
1.
Set the desired alarm time as described in the above section.
2.
Or press "ALARM" key to display the alarm time, press it again to turn on alarm
function with the alarm icon "
3.
When clock reach the alarm time, alarm sound will start.
Where it can be stopped by following operation:
a) Auto-stop after 2 minutes alarming if without any operation and the alarm will activate
again in the next day.
b) By pressing [ ALARM / SNOOZE ] key to enter snooze that the alarm will sound again
after 5 minutes.
c) By pressing and hold [ ALARM / SNOOZE ] key for 2 seconds to stop the alarm and
will activate again in the next day
d) By pressing [ ALARM ] key to stop the alarm and the alarm will activate again in the
next day.
NOTE:
- The snooze could be used continuously in 24 hours.
- During the snooze, the alarm icon "
EN
FR
DE
" displayed on the LCD.
" will keep flashing.
10
ES
IT
NL
RU
Advertisement
Table of Contents
