Outdoor Thermo Sensor; Getting Started; Main Unit; Installation - Youshiko YC9430 User Manual

3. Outdoor Thermo Sensor

D1: Transmission Indication LED
D2: Outdoor Temperature display
D3: Outdoor Humidity display
D4: Battery Compartment

4: Getting Started:

4.1: Main Unit:

Remove battery compartment door and insert 3pcs AAA size battery.
Or connect the power cord to the wall outlet. Before connecting the unit to power,
please make sure your local voltage is the same as marked on the adaptor.
Note:
When powered by battery only, backlight would be off. Press snooze button,

backlight will last for around 5 seconds.
When connecting with the power adaptor on the main unit, even at the same

time batteries have been installed correctly, this product will switch to the
external power supply automatically. (For continuous colour display you must
use power supply at all times) .
4.2: Outdoor Thermo Sensor
Batteries compartment (D4) of thermo sensor is locating behind the back cover,

Insert 2 x AAA batteries observing polarity [ "+" and "–" marks]


5. Installation

Place the main unit on the flat surface.
The remote sensor should be securely mounted onto a horizontal surface.
Note: Transmissions between receiver and transmitter can reach up to 70m in
open area. Open Area: there are no interfering obstacles such as buildings, trees,
D5: Wall Mount Hole
D6: "RESET" button
D7: "C/F" button
D8: Stand
3