Related Manuals for Kranzle LX-RP 1000 TST
Summary of Contents for Kranzle LX-RP 1000 TST
- Page 1 Operating manual High-pressure cleaner LX-RP 1000 TST LX-RP 1200 TST LX-RP 1400 TST LX-RP 1600 TST www.kraenzle.com...
- Page 2 Operating manual High-pressure cleaner LX-RP 1000 TST LX-RP 1200 TST LX-RP 1400 TST LX-RP 1600 TST Operating manual! This manual is a translation of the original manual. Read and conform safety instructions before use! Technical data will be found in the Spare parts list.
-
Page 3: Table Of Contents
Contents Explanatory symbols Dear customer, Explanatory symbols used in the operating manual Failure to observe this note may entail we would like to congratulate you on the purchase of your new high-pressure environmental damage. cleaner and thank you for your confidence in our products! Your choice has fallen on an absolute quality product! Note on the use of the high-pressure cleaner that failure to Kränzle high-pressure cleaners are characterized by their convenient and compact... -
Page 4: Safety Notes
Safety notes Safety notes - This is prohibited! User operating the high-pressure cleaner should wear the necessary protective Replacement of the power supply cables is only permitted by use of an original clothing, i.e. waterproof clothing, rubber boots, safety goggles, ear protection power supply cable of the manufacturer and must be performed by a qualified headwear etc. - Page 5 Safety notes - This is prohibited! Safety notes - This is prohibited! Never direct the high-pressure jet at the high- Only use a power supply cable in perfect working pressure cleaner itself! The high-pressure cleaner order! Do not damage or improperly repair the may not be placed within reach of the high- power cable (tearing, squeezing, running over, ...).
-
Page 6: Description Of High-Pressure Cleaner
Description of high-pressure cleaner Design: This is what you have purchased: Both the LX-RP 1000 TST/LX-RP 1200 TST/ LX-RP 1400 TST/ LX-RP 1600 TST are portable type high-pressure cleaners. Please see construction scheme for more details. 1. High-pressure cleaner 1. Handle... -
Page 7: General Rules
General rules General rules Intended use Oil change This high-pressure cleaner is to be used solely for high-pressure water jet cleaning applications without detergents or low-pressure cleaning work with detergents The first oil change should be carried out (e.g. with a foam injector or washing brush). after approximately 50 operating hours, then every year or after 250 operating Environmental, refuse disposal and water protection regulations... -
Page 8: Functional Details
Functional details Functional details Please note: Lack of water Insufficient quantity of electricity Lack of water occurs more often than you If there are too many collectors in your probably believe. The more powerful a high- proximity connected to the network at the pressure cleaner is the greater is the danger same time, the available voltage and the that a lack of water occurs. - Page 9 Functional details Functional details Water and cleaning system Pressure control valve/safety valve Water must be supplied to the high-pressure pump under pressure or directly sucked The pressure control valve/safety valve protects the high-pressure cleaner from in out of a pressureless container. The water is then forced under pressure by the a build up of excess pressure, and is designed not to permit an excess pressure high-pressure pump to the lance.
- Page 10 Functional details Notes Safety shutdown If the high-pressure cleaner is accidentally not turned off after use or the safety trigger gun is not used for 20 minutes, the high-pressure cleaner automatically changes into safety state by deactivation. By operating the main switch once more, the high-pressure cleaner is activated again.
-
Page 11: Putting Into Operation
Putting into operation Putting into operation Install the water inlet filter (available as For high-pressure cleaners with hose an option) at the water inlet. drum, please loosen the fixation and then completely unwind the high- pressure hose. Unwind high-pressure hose straight and without nooses. The high-pressure hose may leave signs of abrasion on some floors. - Page 12 Putting into operation Putting into operation If using a water inlet filter check it 11. Connect to circuit (see technical data). for cleanliness prior to each startup. Manually unscrew filter bowl, remove The wall socket must be protected on sieve and thoroughly rinse and clean the mains side by a fuse having a time with the rest of the parts in clear water.
-
Page 13: Direct Suction
Direct suction Taking out of operation Switch off the high-pressure cleaner Direct water extraction Due to the suction capacity of its high-pressure pump (up to 2.5 m suction height, 2. Cut off the water supply max. hose length 3 m) this high-pressure cleaner can suck in water for cleaning Open the safety trigger gun catch briefly until the pressure is released purposes from separate containers or ponds. -
Page 14: Small Repairs - Do It Yourself
Small repairs - do it yourself Small repairs - do it yourself Problem Problem No water from nozzle although the high-pressure cleaner is running. Irregular jet from nozzle. The stainless steel pressure gauge shows full pressure. The stainless steel pressure gauge shows low pressure. Cause Cause Most likely the nozzle is blocked. - Page 15 Small repairs - do it yourself Small repairs - do it yourself Problem Problem After closing the safety trigger gun the high-pressure cleaner After closing the safety trigger gun the high-pressure cleaner keeps switching on and off. keeps switching on and off. The stainless steel pressure gauge continuously displays full pressure.
-
Page 16: Kränzle Accessories
Kränzle accessories Kränzle accessories Rotating washing brush Stainless steel pipe 1000 mm Brush head ∅ 180 mm Foam injector Nozzle size 3.2 mm 1 litre, with container With anti-twist protection Dosage in 5 levels With plug-in nipple With plug-in nipple Ord. -
Page 17: Eu Declaration Of Conformity
LX-RP 1600 TST Defects attributable to long and frequent use of the product, typically arising Nominal flow: LX-RP 1000 TST: 960 l/h due to the age of the high-pressure cleaner and intensity of its use are defined LX-RP 1200 TST: 1140 l/h as normal wear in respect of product components. -
Page 18: Inspection Reports
Inspection reports Inspection reports High-pressure cleaners for industrial use have to be checked by an expert every High-pressure cleaners for industrial use have to be checked by an expert every 12 months! Inspection report on annually carried out Labour Safety Inspection (UVV) 12 months! Inspection report on annually carried out Labour Safety Inspection (UVV) according to the Guidelines for Liquid Spray Equipment. - Page 19 Josef Kränzle GmbH & Co. KG Rudolf-Diesel-Straße 20 89257 Illertissen (Germany) sales @ kraenzle.com Made Germany www.kraenzle.com...