Installing The Lower Triple Clamp - KTM SX-E 3 2023 Owner's Manual

13 SERVICE WORK ON THE CHASSIS
13.10
52

Installing the lower triple clamp

F02885-10
M01667-11
M02044-11
Main work
–
Clean the bearing and sealing elements, check for damage,
and grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount
upper steering head bearing
–
Check that the O-ring at the top
–
3
Push on protective ring
–
Position the upper triple clamp and handlebar.
–
4
Mount nut , but do not tighten yet.
Condition
Individual installation position
(SX‑E 3)
–
Position the fork legs.
Guideline
Observe the position determined during removal.
Bleeder screws
p. 111)
1
.
2
is correctly positioned.
.
5
are positioned toward the rear.