KTM SX-E 3 2023 Owner's Manual page 96

16 POWERPACK LV, BATTERY CHARGER
94
Info
If the temperature of the Powerpack LV exceeds the permissible value while it is being charged, the bat-
tery charger stops charging. The malfunction is displayed on the multifunctional element.
After the temperature of the Powerpack LV returns to the permissible range, charging is resumed automat-
ically.
M01685-10
M01686-10
M01687-10
Preparatory work
–
Position the battery charger. (
–
Press and hold the On/Off button until the multifunctional ele-
ment goes out.
–
Remove the magnetic switch
bar.
Main work
–
Remove charging socket protection cap
–
Remove charging plug protection cap
–
Make sure that all plugs, bushings, and cables are dry.
Warning
Risk of injury The intrinsic safety of the Powerpack LV
can only be guaranteed if the original battery charger
is used.
The Powerpack LV may only be charged with the orig-
inal battery charger.
–
Only use the original battery charger to charge the
Powerpack LV.
–
Connect the battery charger to the Powerpack LV.
Guideline
A
Observe plug marking
Insert the plug straight so that the contacts are not bent.
p. 92)
from the holder on the handle-
1
.
2
.
.