Adjusting The Seat Height On The Frame - KTM SX-E 3 2024 Owner's Manual

12.4

Adjusting the seat height on the frame

Preparatory work
–
Remove the seat. (
Main work
–
Remove screw
M01675-10
–
Remove screws
–
Remove screws
M01676-10
–
Remove screws
holes at the desired seat height.
Guideline
Pay attention to the wiring harness.
High seat position
Low seat position
–
Mount and tighten screws
Guideline
Screw, sub-
frame
M01677-10
–
Position rear fairing
tighten.
Guideline
Rear fairing screw
–
Position splash protector
and tighten.
M01676-10
p. 58)
1
and the front fairing.
2
with bushings and splash protector
4
with bushings and rear fairing
6 7
and position subframe
Drill holes
Drill holes
6
.
M8 30 Nm (22.1 lbf ft)
5 4
, mount screws with bushings, and
M6 8 Nm (5.9 lbf ft)
3
, mount screws
SEAT HEIGHT 12
3
.
5
.
at the drill
A
B
Loctite ® 243™
2
with bushings,
43