19 Storage; Preparing For Use After Storage - KTM SX-E 3 2024 Owner's Manual

19 STORAGE

19.1
19.2
96
Storage
Info
If the motorcycle is not being used for an extended length of time, additional measures are recommended.
Before storing the motorcycle, check all parts for function and wear. If service, repairs, or replacements
are necessary, you should do this during the storage period (less workshop overload). This allows you to
avoid long waiting periods when the next season starts.
401058-01

Preparing for use after storage

401059-01
–
Clean the motorcycle. (
–
Check tire pressure. ( p. 86)
–
Charge the LV traction battery. (
Guideline
Stop charging at 30 %.
The last segment lights up yellow.
Tip
If necessary, drain the LV traction battery sufficiently.
–
Store the vehicle in a dry location that is not subject to large
fluctuations in temperature.
Guideline
Ideal storage temperature
Info
KTM recommends jacking up the motorcycle.
–
Raise the motorcycle with a lift stand. (
–
Cover the motorcycle with a tarp or cover that is permeable to
air.
Guideline
Do not use any non-porous materials, as moisture cannot
escape and corrosion can occur.
–
Remove the motorcycle from the lift stand. (
–
Charge the LV traction battery. (
–
Perform checks and maintenance measures when preparing for
use. ( p. 24)
–
Take a test ride.
p. 94)
p. 89)
10 ... 20 °C (50 ... 68 °F)
p. 46)
p. 46)
p. 89)