KTM SX-E 3 2024 Owner's Manual page 81

Main work
(SX‑E 3)
–
Remove lock ring
–
Remove screw
M02060-10
–
Remove the brake linings.
–
Clean the brake caliper and the brake caliper bracket.
M02061-01
–
Remove screws
–
Take off cover
–
Press the brake piston back into the basic position and
ensure that brake fluid does not flow out of the brake fluid
reservoir; extract some if necessary.
M02057-11
–
Position the new brake linings.
Info
Always change the brake linings in pairs.
Ensure that the brake linings are correctly posi-
tioned in the holding spring.
M02061-01
–
Mount and tighten screw
Guideline
Screw, brake linings M5
–
Mount lock ring
M02060-10
BRAKE SYSTEM 14
1
.
2
.
3
.
4 5
with membrane .
2
.
8 Nm (5.9 lbf ft)
1
.
79