KTM SX-E 3 2024 Owner's Manual page 73

Main work
–
Move the brake fluid reservoir mounted on the handlebar to a
horizontal position.
–
Remove screws
–
Take off cover
M02049-10
–
Remove screw
–
Press back the brake linings by slightly tilting the brake caliper
laterally on the brake disc. Carefully pull the brake caliper
backward from the brake disc.
–
Press the brake piston back into the basic position and ensure
that brake fluid does not flow out of the brake fluid reservoir;
extract some if necessary.
M02067-10
–
Remove lock ring
–
Remove screw
–
Remove the brake linings.
–
Clean the brake caliper and the brake caliper bracket.
–
Position the new brake linings.
Info
Always change the brake linings in pairs.
Ensure that the brake linings are correctly positioned in
the holding spring.
–
Mount and tighten screw
Guideline
Screw, brake linings
–
Mount lock ring
Warning
Danger of accidents Oil or grease on the brake discs
M02059-10
reduces the braking effect.
–
Always keep the brake discs free of oil and grease.
–
Clean the brake discs with brake cleaner when nec-
essary.
–
Check the brake discs. (
1
.
2 3
with membrane .
4 5
and .
6
.
7
.
7
.
M5 8 Nm (5.9 lbf ft)
6
.
p. 66)
BRAKE SYSTEM 14
71