Checking The Brake Linings And The Brake Lining Retainers Of The Rear Brake; Changing The Rear Brake Linings - KTM SX-E 3 2024 Owner's Manual

14.13

Checking the brake linings and the brake lining retainers of the rear brake

Warning
Danger of accidents Worn-out brake linings reduce the braking effect.
–
Ensure that worn-out brake linings are replaced immediately. (Your authorized KTM workshop will be
glad to help.)
14.14

Changing the rear brake linings

Warning
Danger of accidents Incorrect servicing will cause the brake system to fail.
–
Ensure that service work and repairs are performed professionally. (Your authorized KTM workshop
will be glad to help.)
–
Add brake fluid up to level
Guideline
A
Level
below reservoir rim)
Brake fluid DOT 4 / DOT 5.1 (
–
Position the cover with the membrane.
–
Mount and tighten the screws.
H01654-10
Info
Use water to immediately clean up any brake fluid
that has overflowed or spilled.
Finishing work
–
Remove the motorcycle from the lift stand. (
–
Check the brake linings for lining thickness
Minimum thickness
» If the minimum thickness is less than specified:
–
Change the rear brake linings.
–
Check the brake linings for damage and cracking.
» If damage or wear is encountered:
–
Change the rear brake linings.
–
Check that the brake linings are secured.
M02047-10
» If the brake linings are not secured correctly:
–
Secure brake linings, replace with new parts if neces-
sary.
A
.
10 mm (0.39 in)
(brake fluid level
p. 105)
≥ 1 mm (≥ 0.04 in)
A
(
(
BRAKE SYSTEM 14
p. 46)
A
.
p. 77)
p. 77)
77