Bindicator PRD1000 Instruction Manual page 89

PRD1000 Analog Input Process Meter
Display Parameter
LED test
LED t
Length
Length
Linear Linear
Lit Hi Max on little
display
Max/min little
Lit HL
display
Min on little display
Lit Lo
Little Little display
Locked
locd
Latching-cleared
Lt-CLr
4-20 mA
mA
mAn Manual
Maximum
mAx
Menu button
menu
min Minimum
No PtS Number of points
Relays output hold
O Hold
Off
OFF
OFF 1 Off 1
On On
On 1
On 1
Overrange
O-rang
Action/Setting Description
Test all LEDs
Enter the tank's length in inches
Set meter for linear function and select
number of linearization points
Assign digital input to display max on the
small display
Assign digital input to toggle max/min on the
small display
Assign digital input to display min on the
small display
Press Enter to assign the small display
parameter (default: engineering units)
Enter password to unlock meter
Set relay for latching operation with manual
reset only after alarm condition has cleared
Set meter for 4-20 mA input
Press Enter to manually control relays
operation
Program maximum mA output allowed
Assign digital input to Menu button
Program minimum mA output allowed
Set meter for 2 to 32-point linearization
Assign digital input to hold all relays state
Disable relay and front panel status LED,
turn relays off, program off time delay
Set relay 1 Off time delay (1-8)
Enable fail-safe operation, turn relays on,
program on time delay
Set relay 1 On time delay (1-8)
Program mA output for display overrange
89
Instruction Manual