Front Panel Buttons And Status Led Indicators - Bindicator PRD1000 Instruction Manual

PRD1000 Analog Input Process Meter

Front Panel Buttons and Status LED Indicators

Button Description
Symbol
Menu
Right arrow/F1
Up arrow/F2
Enter/F3
Note:
F4 is a digital input.

Press the Menu button to enter or exit the Programming Mode at
any time.

Press the Right arrow button to move to the next digit during digit or
decimal point programming.

Press or hold the Up arrow button to scroll through the menus,
decimal point, or to increment the value of a digit.

Press the Enter button to access a menu or to accept a setting.

Press and hold the Menu button for three seconds to access the
advanced features of the meter.
LED Status
1-2 Alarm 1-2 indicator
1-2
Flashing: Relay in
manual control mode
M
T Flashing: Tare
Flashing: Relay
1-2
interlock switch open
Note:
LEDs for relays in manual mode
flash with the "M" LED every 10
seconds. "M" flashing by itself
indicates manual control is
used.
26
Instruction Manual