CHAPTER 2: ASSEMBLY INSTRUCTIONS
ELLIPTICAL ASSEMBLY STEPS (continued):
STEP 8: Floor Levelers:
a)
If necessary, adjust four levelers on bottom of machine to accommodate uneven flooring.
STEP 9:Remove Transport Handle Bars:
b)
Once Elliptical is moved into its final location, remove the two Handle Bars on the back of the machine and store
with owner's manual for future use. Figure 30
STEP 10: Remove Protective Film from Decals:
a) Once Elliptical is moved into its final location, remove the protective film from the decals and from the
"True" on the lower shroud.
Figure 30
Truefitness.com / 800.426.6570 / 636.272.7100
24