True C400E-9 Owner's Manual page 13

CHAPTER 2: ASSEMBLY INSTRUCTIONS
ELLIPTICAL ASSEMBLY STEPS (continued):
Pre-Assembly Step 1: Install Transport Handle Bars:
a) Important: With machine still on pallet, attach handle bars to front and rear of machine. Handle bars will provide
assistance in moving machine. Figures 1 & 2
b) Carefully remove Elliptical from pallet.
c) Important: After final machine placement has been completed, remove transport handle bars from machine and
store handle bars with owner's manual.
Remove handles
from front of Base
after machine is
moved into final
placement
Figure 1
Attach Handles
to Base and use
both Front and
Rear Handles
Elliptical off
Figure 2
Truefitness.com / 800.426.6570 / 636.272.7100
to move
the pallet
9