Table of Contents
Advertisement
CHAPTER 2: ASSEMBLY INSTRUCTIONS
ELLIPTICAL ASSEMBLY STEPS (continued):
Pre-Assembly STEP 2: Measure Doorways:
a)
Measure all doorways, hallways and stairwells to make sure that the 33 inch wide frame will fit.
b)
If it will not fit, move all parts to the final location and assemble machine in that location. If the machine needs to
be placed on its side, keep the left side Styrofoam attached to the Base to help avoid damaging the plastic covers.
Figure 4
Please Note When Moving The Elliptical:
Do not insert fork from
fork truck in this
location. There are
exposed parts that can
be damaged.
Figure 3
Figure 4
Truefitness.com / 800.426.6570 / 636.272.7100
Elliptical base can be set
on its LEFT side, but
ONLY with the attached
Styrofoam underneath it.
10
Advertisement
Table of Contents
