True C400E-9 Owner's Manual page 15

CHAPTER 2: ASSEMBLY INSTRUCTIONS
ELLIPTICAL ASSEMBLY STEPS (continued):
STEP 1: Assemble Pedestal to Base:
a)
Remove Front Handles before assembling Pedestal. Figure 5
b)
Use 2 people to slide the Pedestal straight down onto the Base and be careful to not pinch the wires on the right
side of the base. Figure 6
c)
Open up Bag 1. Use 2 M12x12mm bolts and 8 M8x12mm bolts to attach Pedestal to Base. Figure 7.
Note: Tightening side bolts first while holding Pedestal vertical may assist in aligning other bolts
d)
Connect wires. Figure 8
M8x12mm
M12x12
mm Bolt
Insert these bolts
first to help align
other bolts
Remember to
remove handles
Figure 5
NOTE: 5 BOLTS
PER SIDE
Bolts
Figure 7
Truefitness.com / 800.426.6570 / 636.272.7100
Wires
Pedestal
Figure 6
Figure 8
Base
11