Interface Grouping Criteria - ZyXEL Communications vmg8924-b10a User Manual

Chapter 12 Interface Group
Table 74 Interface Group Configuration (continued)
LABEL
#
Filter Criteria
WildCard
Support
Remove
Apply
Cancel

12.2.2 Interface Grouping Criteria

Click the Add button in the Interface Grouping Configuration screen to open the following
screen.
Figure 104 Interface Grouping Criteria
The following table describes the fields in this screen.
Table 75 Interface Grouping Criteria
LABEL
Source MAC
Address
DHCP Option
60
Enable
wildcard on
DHCP
option 60
option
180
DESCRIPTION
This shows the index number of the rule.
This shows the filtering criteria. The LAN interface on which the matched traffic is received
will belong to this group automatically.
This shows if wildcard on DHCP option 60 is enabled.
Click the Remove icon to delete this rule from the Device.
Click Apply to save your changes back to the Device.
Click Cancel to exit this screen without saving.
DESCRIPTION
Enter the source MAC address of the packet.
Select this option and enter the Vendor Class Identifier (Option 60) of the matched traffic,
such as the type of the hardware or firmware.
Select this option to be able to use wildcards in the Vendor Class Identifier configured for
DHCP option 60.
VMG8924-B10A User's Guide