Selecting Automatic/Manual Pump Switching Function (Fi G. 2); Maintenance And Storage; Maintenance; Storage - Fieldmann FVC 5015 EK Manual

Selecting automatic/manual pump switching function (fi g. 2)
The pump switching can be set to automatic or
manual mode.
Settings are made with the switch, see fi g.2.
If automatic operation is selected, the pump start/stop
switching is controlled by an integrated fl oat.
If manual operation is selected, the pump start/stop
performed by connecting to/disconnecting from
power supply.
ATTENTION! The pump must not be dry
operated.
ATTENTION! Risk of dry running – The pump is
cooled using the pumped liquid.
In the event of dry running, the pump motor may
burn up.

5. MAINTENANCE AND STORAGE

This submersible pump is approved as a maintenance-free product undergoing several fi nal inspections.
We recommend you perform regular inspections and maintenance, which will ensure a long lifetime and
continuous performance.
ATTENTION! Disconnect the power source before performing any maintenance.

Maintenance

If the pump is regularly moved during operation, it should be rinsed out after each use with clean water.
If the pump is permanently installed, the working order of the fl oat switch should be checked every 3 months.
Any fi brous deposits that could deposit themselves inside the pump, should be removed using a water
current.
If an excessive amount of debris accumulates in the body of the pump, fl ush the pump out with clean water.

Storage

Store the thoroughly cleaned out pump in a dry place out of children's reach.
SUBMERSIBLE GARDEN PUMP
Putting into operation | Maintenance and storage
5 EN
Fig. 2
Manual operation
Automatic operation
USER'S MANUAL