Wacker Neuson Contact 2.4; Labeling On The Machine; Use Of The Operator's Manual - Wacker Neuson VP Operator's Manual

Vibration plate

Hide thumbs

Table Of Contents

Table of Contents

2.4

Wacker Neuson Contact

2.5

Labeling on the machine

2.6

Use of the operator's manual

[en] | 02/2020 | 5100056064 | VP | Operator's manual

Depending on the country, the Wacker Neuson contact is a Wacker

Neuson Service, a Wacker Neuson subsidiary or a Wacker Neuson

dealer.

On the Internet at - http://www.wackerneuson.com.

Type label data

The type label contains information that uniquely identifies this machine.

This information is required for ordering spare parts and for technical

queries.

Enter the data on the machine in the following table:

Designation

Group - Type

Material number (Mat. no.)

Machine version ( version)

Machine number (machine no.)

Year of construction

This operator's manual:

• must be regarded as an integral part of the machine and must be

kept in a safe place throughout its service life.

• must be passed on to each subsequent owner or user of this ma-

chine.

• applies to various machine types from one product range. For this

reason, some illustrations may differ from the appearance of the pur-

chased machine. Variant-dependent components that are not in-

cluded in the scope of delivery can also be described.

Wacker Neuson reserves the right to change the information in this oper-

ator's manual without notice.

It must be ensured that any changes or additions made by the manufac-

turer are immediately incorporated into this operator's manual.

The following will be described:

Group - Machine Type

VP1135A

VP1135Aw

VP1135Aw CN

VP1340A

VP1340Aw

VP1340Aw CN

VP1340Aw

VP1550A