16000, 26000, And 28000 Security Appliances Installing The Telescopic Rails; General Requirements For Racks - Quantum CHECK POINT 16000 Quick Start Manual

Appliances telescopic rails

Hide thumbs

Table Of Contents

Table of Contents

16000, 26000, and 28000 Security

Appliances Installing the Telescopic

Rails

You can install these security appliances in a rack with the telescopic rails hardware:

Security Appliance

16600 Hyperscale Security Appliances (1U)

28600 Hyperscale Security Appliances (1U)

16000 Base/Plus/Turbo Security Appliances (2U)

16200 Base/Plus Security Appliances (2U)

26000 Base/Plus/Turbo Security Appliances (3U)

28000 Base/Plus Security Appliances (3U)

General Requirements for Racks

Check Point appliances are designed for a standard 19-inch (48.26 cm) rack (see specification EIA-310-D).

The telescopic rails are designed for racks with these specifications:

Minimum Depth

22 inches (55.9 cm)

24 inches (61 cm)

Front and rear rack doors must have equally distributed holes on at least 65% of the surface area to give

sufficient airflow. Make sure that the racks have sufficient clearance to service the Check Point appliances

that are mounted on telescopic rails.

The telescopic rails can be used with racks that have round holes or square holes.

Rack

Clearance Requirement

Side

Front

36 in (91.4 cm) plus additional clearance, if necessary, for the mechanical lift used to move

the appliance and rails equipment.

Rear

16 in (40.6 cm) from the rear of the rack or appliance without the rear cabinet door.

22 in (55.9 cm) from the rear of the rack or appliance with the rear cabinet door.