Lexmark XM7355 User Manual page 314

Upgrading and migrating
Installing the staple, hole punch finisher
CAUTION—TIPPING HAZARD: Installing one or more options on your printer or MFP may require a
caster base, furniture, or other feature to prevent instability causing possible injury. For more information
on supported configurations, see www.lexmark.com/multifunctionprinters.
1
Turn off the printer.
2
Unplug the power cord from the electrical outlet, and then from the printer.
3
Unpack the staple, hole punch finisher.
4
Remove the printer top cover.
5
Install the finisher to the printer, and then push it down to make sure that it is securely attached to the printer.
314