Lexmark XM7355 User Manual page 140

Understanding the printer menus
Menu item
Offset Pages
None*
Between Copies
Between Jobs
Flip Style
Long Edge*
Short Edge
Pages per Side
Off*
2 pages per side
3 pages per side
4 pages per side
6 pages per side
9 pages per side
12 pages per side
16 pages per side
Pages per Side Ordering
Horizontal*
Reverse Horizontal
Reverse Vertical
Vertical
Pages per Side Orientation
Auto*
Landscape
Portrait
Pages per Side Border
None*
Solid
Separator Sheets
Off*
Between Copies
Between Jobs
Between Pages
Separator Sheet Source
Tray [x] (1*)
Multipurpose Feeder
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Offset the output of each print job or each copy of a print job.
Notes:
•
Between Copies offsets each copy of a print job if Collate is set to On
[1,2,1,2,1,2]. If Collate is set to Off [1,1,1,2,2,2], then each set of printed pages
are offset, such as all page 1s and all page 2s.
•
Between Jobs sets the same offset position for the entire print job
regardless of the number of copies printed.
•
This menu item appears only when a staple finisher is installed.
Determine which side of the paper is bound when performing two‑sided printing.
Print multiple page images on one side of a sheet of paper.
Specify the positioning of multiple page images when using Pages per Side menu.
Specify the orientation of multiple page images when using Pages per Side menu.
Print a border around each page image when using Pages per Side menu.
Insert blank separator sheets when printing.
Specify the paper source for the separator sheet.
140