Loading paper and specialty media
•
When loading prepunched paper, make sure that the holes on the long edge of the paper are against
the right side of the paper guide.
•
Load envelopes with the flap side down and against the left side of the paper guide.
Warning—Potential Damage: Do not use envelopes with stamps, clasps, snaps, windows, coated
linings, or self‑stick adhesives.
5
From the control panel, set the paper size and paper type to match the paper loaded.
Linking trays
1
From the home screen, touch Settings > Paper > Tray Configuration > select a paper source.
2
Set the same paper size and paper type for the trays that you are linking.
3
From the home screen, touch Settings > Device > Maintenance > Configuration Menu > Tray Configuration
> Tray Linking.
4
Touch Automatic.
To unlink trays, make sure that no trays have the same paper size and paper type settings.
Warning—Potential Damage: The temperature of the fuser varies according to the specified paper type. To
avoid printing issues, match the paper type setting in the printer with the paper loaded in the tray.
Without an optional staple finisher With an optional staple finisher
Two‑sided printing
One‑sided printing
Two‑sided printing
Two‑sided printing
38