Service; Replacing Signal Converter / Lc Display - Siemens SITRANS FX330 Operating Instructions Manual

SITRANS FX330

7.1 Replacing signal converter / LC display

The signal converter has to be replaced by a signal converter with a compatible CG number ⑦ .
To be compatible, the CG number must be identical except for the seventh digit. The seventh
digit can vary depending on the language package.
For example: CG2000x200
x = 1
x = 2
x = R
x = S
Table 7-1: Possible language packages
Figure 7-1: Connect the transmitter module
1 Connector for LC display
2 Service connector
3 SIL connector
4 Display brackets
5 Connection to the flow sensor
6 Fixing screw
7 CG number
08/2022 - A5E36751269-AG EN
Full language package according to table on page 62.
European language package: English, German, French, Italian, Spanish, Swedish, Czech,
Polish, Turkish, Slovenian
Chinese language package: Chinese, English, German, French
Russian language package: Russian, English, German, French
www.siemens.com/flow

SERVICE

7
99