8
Rack Mounting
Brackets
9
Lock LEDs
10
Reset Switch
11
LED Illumination
Light
CL1000M Rear View
1
2
No. Component
1
Power Socket
2
Power Switch
3
KVM Port
The rack mounting brackets located at each corner of the unit
secure the chassis to a system rack.
The Num Lock, Caps Lock, Scroll Lock LEDs are located
here.
Located to the right of the Lock LEDs. Press this recessed
switch in with a thin object to perform a system reset.
Press the Exit/Light pushbutton for two seconds to turn the
LED light On or Off. (Default: On)
3
This is a standard 3-prong AC power socket. The power cord
from your AC source plugs in here.
This is a standard rocker switch that powers the unit On and
Off.
The cable that links the CL1000M to the KVM switch plugs in
here.
Note: The shape of this SPHD connector has been
specifically modified so that only KVM cables designed to
work with this switch can plug in (see Cables, page 3, for
details).
Chapter 1. Introduction
Description
5