Table of Contents
Advertisement
ELECTRONIC IMAGE STABILIZER (EIS)
This function corrects slight shaking of the image
in the following record modes.
•
Recording by zooming up to a distant subject
•
Recording by approaching a small subject
•
Recording while walking around
•
Recording a subject behind the window of a
vehicle
1. Press the EIS button to engage the electronic
image stabilizer and to display the EIS indi¬
cator " ^
1
)
•
Press the button again to switch off this
function.
2. Press the start/stop button to start recording.
• EIS corrects slight shaking of the image
when " '©)) " is displayed.
NOTES:
• Shaking
of the
image
appears
in
the
viewfinder with a slight delay.
•
EIS may not operate correctly when a wide or
teleconverter lens is used.
• When the EIS function is engaged in the vicin¬
ity of the zoom range with "ZOOM" displayed
in the viewfinder and the zoom is moved from
the wide-angle end, the image size will
change, but this is normal.
• When the EIS function is engaged, the picture
becomes rough.
• When the EIS function is engaged, the angle of
view at the wide-angle end becomes nar¬
rower.
EXPOSURE CORRECTION
This camera/recorder is provided with an auto iris
mechanism which automatically adjusts the lens
aperture in accordance with the incident light.
When the object is dark, the iris opens automati¬
cally, and it closes when the object is bright.
When the power is switched off, the iris is auto¬
matically set to the fully closed position.
When the background is brightly lit and the sub¬
ject appears too dark, press and hold down
B. LIGHT button during recording. While you
hold the button depressed, you can correct the
back light.
Advertisement
Table of Contents
