Atdec AD-AC-PH Installation Manual page 3

3. Attach tray
3.1 Lift Tray B with two hands and
engage simultaneously with hook
detail on both sides of Bracket A.
3.2 With latches in open
position rotate Tray B until
parallel with mounting surface.
4. Secure tray
4.1 Line up latches with holes
in bracket and rotating inwards
until they engage with a click.
4.2 (OPTIONAL) For extra security
attach M4 screws F, cable ties or
locks to both latches.
Do not overtighten
screws.
Securing
screw F
5. Component maintenance
5.1 Check for and remove any securing
screws, cable ties or locks.
5.2 Use two hands to
support tray while
opening both
latches. Smoothly
rotate tray into
hanging position.
Components
accessible without
need to remove tray.
No portion of this document or any artwork contained herein should be reproduced in any way without
the express written consent of Atdec Pty Ltd. Due to continuing product development, the manufacturer
reserves the right to alter specifications without notice. ©20230803
Enclosed
Enclosed latch position
Cable tie
or lock
Securing
screw F
NOTE: Cables must
always exit at the
hinging side of tray
Hook
Exposed
Securing
screw F
Cable tie
or lock
Exposed latch position
AD-AC-PH Page 3 of 3