Atdec AD-TVAC-CM Installation Manual

AV Cart Camera Mount

COMPONENT CHECKLIST

Connecting bracket
5mm 4mm
Allen Key Allen Key

IMPORTANT INFORMATION

! Please ensure this product is installed as per these installation instructions.
! The manufacturer accepts no responsibility for incorrect installation.
! Failure to assemble this product correctly may cause serious injury/death during or following installation.
! This product should only be installed by professional installers of good mechanical aptitude, who fully understand these instructions and the
consequences of incorrect installation.
! Do not over tighten screws.
! Two person installation is recommended.
! Product not suitable for use outdoors.
! After installation is complete check to verify that AV Cart is secure and safe for use.
! Curved monitors, deep devices (such as all-in-one PCs), VESA mounted accessories (such as mini PC brackets and mounts), and offset VESA
locations exert additional leverage that can exceed the capacity of the mount even though the monitor weight may be within the stated range.
Please contact Atdec if you would like further information.
WARNING! Death or serious injury may occur when children climb on audio and/or video equipment furniture. A remote control or toys placed on
!
the cart may encourage a child to climb on the cart and as a result the cart may tip over on to the child.
M6 M5 x 10
Wrench Screw (x2)
Camera Shelf
M6 x 10 M6 Flange
Screw (x2) Nut
Installation Guide
AD-TVAC-CM

REQUIRED TOOLS

M5 x 8 mm
• Phillips Head
Screw (x2)
Screwdriver
CAPACITY
M6 Washer
SHELF WEIGHT
(x2)
0 - 5kg
(0 - 11lbs)
AD-TVAC-CM Page 1 of 6