Wall Mounting - ElectrIQ eiQ-49CV5UWD120FSHQA-V3 User Manual

WALL MOUNTING

•
The monitor is provided with mounting holes for
a VESA approved wall mounting bracket (not
supplied).
•
The VESA mounting pattern is: 75x75mm and
the size of the screws is 4 x M6 x 10 (not
supplied)
•
Do not use screws longer than specified or
damage will occur to the internal components.
NOTE: As the monitor is considered heavy, please consult with a professional wall mount installer to
perform the installation.
2. Remove the original
bolts x 4 from the
opening in the back
of the monitor.
Follow the directions
received with your
mount, stand, or
accessory and install
the monitor on the wall or fixture as desired. Remember to use the included bolts when
attaching anything to the back of the monitor. Do not discard the original bolts as these may
be needed for future use.
NOTES:
Do not pinch the screen directly with your hand when hanging the product to prevent the
⚫
screen from breaking.
Due to the heavy weight and dimensions of LCD screens and their fragile nature, we
⚫
recommend that they are unpacked and assembled by 2 people and professional installers are
used to wall mount them (wall mounting is optional).
If you do not understand the instructions, or are unsure how to install this product, please
⚫
contact a professional for assembly advice and assistance.
Careful consideration should be made regarding the location the monitor is to be wall mounted
⚫
as some walls are not suitable for installation. If the monitor is to be mounted on drywall, the
mount must be anchored into a wooden stud, concrete block or brick behind the drywall.
Installing on drywall alone may not support the weight of the display.
When drilling holes, it is particularly important to take care of electrical cables, water or gas
⚫
pipes in the wall. Please follow the instructions provided by the wall bracket manufacturer and
ensure that all fixing bolts supplied are used.
electriQ and its distributors and dealers are not liable or responsible for damage or injury
⚫
caused by improper installation, improper use or failure to observe these safety instructions. In
such cases any guarantee will expire.
1. Open the package, take out the product with the foam still
attached, and gently place it on a desk or table. Remove
the accessories and the foam covering the rear of the
monitor. If the monitor was already attached to the stand,
remove the stand.
8