Table of Contents
Advertisement
WALL MOUNTING
•
The monitor is provided with mounting holes for a VESA approved wall mounting bracket
(not supplied).
•
When wall mounting, the supplied extension bolts must be fitted to the rear of the monitor to
allow the bracket to fix firmly to the rear of the monitor.
•
M4 x 12 bolts should be used to attach the bracket to the extension bolts.
•
Do not use bolts longer than the size specified above for your model or damage will occur
to the internal components.
NOTES:
•
Due to the heavy weight and dimensions of the LCD screens and their fragile nature, we
recommend that they are unpacked and assembled by 2 people and professional installers
are used to wall mount them (Wall mounting is optional). If you do not understand the
instructions, or are unsure how to install this product, please contact a professional for
assembly advice and assistance.
•
Careful consideration should be made regarding the location the monitor is to be wall
mounted as some walls are not suitable for installation. If the monitor is to be mounted on
drywall, the mount must be anchored into a wooden stud, concrete block or brick behind the
drywall. Installing on drywall alone may not support the weight of the display.
•
When drilling holes it is particularly important to take care of electrical cables, water or gas
pipes in the wall. Please follow the instructions provided by the wall bracket manufacturer
and ensure that all fixing screws supplied are used.
•
electriQ and its distributors and dealers are not liable or responsible for damage or injury
caused by improper installation, improper use or failure to observe these safety instructions.
In such cases any guarantee will expire.
CONTROL PANEL
The controls are located centrally at the base of the monitor. Pressing any button when the On
screen display is not visible will display the Quick Menu
1
Menu
2
Down
3
Up
4
Exit
5
Power
6
Power indicator
7
Advertisement
Table of Contents
