CONNECTIONS AVAILABLE ON THE MONITOR
1
1.
POWER
2.
DP1 (Display Port 1.2, 280Hz, Free Sync)
3.
HDMI 1 (HDMI 2.0, 240Hz, Free Sync)
4.
HDMI 2 (HDMI 2.0. 240hz, Free Sync)
3
5.
DP2 (Display Port 1.2, 280Hz, Free Sync)
6
6.
AUDIO OUT
WALL MOUNTING
• The monitor is provided with mounting holes for a VESA approved wall mounting bracket (not supplied).
• The VESA mounting pattern is: 100x100mm and the size of the screws is 4 x M6 x 10 (not supplied)
• Do not use screws longer than specified or damage will occur to the internal components.
NOTE: As the monitor is considered heavy, please consult with a professional wall mount installer to perform
the installation.
GETTING STARTED
MONITOR CONTROLS
POWER
Press the middle of the joystick to turn on the monitor, and then press to enter the OSD menu.
JOYSTICK UP
Change the value on selected menu / Navigate up
the menu within the OSD.
JOYSTICK DOWN
Change the value on selected menu/Navigate down
the menu within the OSD.
LAMP BUTTON
Press to change the colour of the light, and press and hold to turn off the light.
JOYSTICK LEFT
Change the value on selected menu / Move
left within the OSD
JOYSTICK RIGHT
Change the value on selected menu /
right within the OSD
6
Move