Table of Contents
Advertisement
Model W73, Wood Frame
Installation
G. Install track to door.
1.
OR
2.
H. Install closer.
1.
I. Install cover plate.
1.
J. Attach arm to closer.
1.
2.
Copyright © 2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole or
in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.
ISW73 07/21
Make sure slider and track
components are installed prior to
installing track to door. See Step F.
Install track into top of door using
either four (4) 1/4-20 x 7/16" machine
screws for metal doors or four (4)
#14 x 1-1/4" wood screws for wood
doors. (Figure 12).
NOTE: If necessary, use optional
retrofit spacer (replacement
application only, consult factory).
Install closer into wood mounting
clips with four (4) 1/4-20 x 5/8"
machine screws. (Figure 13)
NOTE: Mounting plate should be
flush with frame rabbet.
Install cover plate to closer body with
six (6) 6-32 x 1/4" machine screws.
(Figure 14)
Attach arm to closer shaft with
1/4-20 x 1/2" machine screw and
washer. Tighten securely. (Figure 15)
NOTE: Ensure countersink recess
side of arm faces down.
Insert 10-24 x 1-1/2" socket head cap
screw into arm and clamp arm tightly
to pinion square. (Figure 15)
Hinge
Side
Figure 12
Frame Rabbet
1/4-20 x 5/8 FHPMS
Figure 13
6-32 FHPMS
(6 each)
Figure 14
Figure 15
1/4-20 x 7/16 FHPMS (4 each)
or 14 x 1-1/4 FHPWS (4 each)
Countersink
Arm Clamp
Arm Screw and
Screw
Conical Washer
Optional
Retrofit Track
Spacer
Recess
7
Advertisement
Table of Contents
