Model 93 Overhead Concealed Closer
Non-Hold Open and Hold Open
Metal Frame Installation Instructions
WARNING
This product can expose you to lead which is known to the state of
California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65warnings.ca.gov.
Model 93 (Left Hand shown)
Center Pivot Hung
Components
LH: 90236-DCP (finish)
RH: 90237-DCP (finish)
Pivot Kit
70224KIT- (finish)
Tools Needed
Phillips
Flathead
Screwdriver
Screwdriver
Copyright © 2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole or in
part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.
IS93 07/21
Arm
Closer Body
91DCP
LAP
or
PH91DCP LAP (ADA)
AND
#7
5/16" 3/8"
Hex Wrenches
Drill
for Metal
Pour la version francaise voir www.nortondoorcontrols.com.
READ AND FOLLOW ALL INSTRUCTIONS. SAVE THESE INSTRUCTIONS.
Cover Plate
LH: 90272-(finish)
RH: 90275-(finish)
Retrofit Track Spacer and Screws,
Optional (90260)
Not for new installation. Replacement only.
Consult factory.
Level
1/4-20
3/16"
Hammer Drill
for Wood
Track
(90239)
Optional Hold Open
Assembly (90254)
Slider
Non Hold Open Stop
(90253)
Block (90255)
Tape
Framing
Measure
Square
Grout
Spreader
Plumb Bob
Tool
Pencil
Hammer