Advertisement
Quick Links
2017-Current
Fits:
ASSISTANCE IS HIGHLY RECOMMENDED
REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT.
READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION.
DO NOT OVER TORQUE. STANDARD OPERATING LOAD FOR TIGHTEN
BODY MOUNT NUTS & BOLTS VARIES FROM 45 TO 65 FOOT POUND.
Qty
1
HD1 Front Bumper Assembly
1
Winch Tray Bracket Assembly
2
Plastic Plugs for license plate mount
1
License Plate Bracket
1
Offset Left LED Bracket
1
Offset Right LED Bracket
4
12-1.75mm x 170mm Hex Bolts
8
12-1.75mm x 50mm Hex Bolts
24
12mm x 32mm x 3mm Flat Washers
12
12mm Lock Washers
12
12mm Hex Nuts
6
10mm x 34mm x 3mm Flat Washers
Page 1 of 7
Front HD Bumper
Part No. FHDB006TI
Ford F250/350 Superduty
Part Description
PARTS LIST:
Qty
6
10mm Lock Washers
6
10mm Hex Nuts
2
8-1.25mm x 25mm Hex Bolts
2
8-1.25mm x 16mm Hex Bolts
6
8mm x 24mm x 2mm Flat Washers
4
8mm Lock Washers
2
8mm Hex Nuts
2
6mm x 20mm Button Head Screw
4
6mm x 18mm x 1.6mm Flat Washers
2
6mm Nylon Lock Nut
1
4mm Wrench(6mm)
www.TrailFX.com
60-180 min
CUTTING NOT
REQUIRED
support@trailfx.com
1 866 638 4870
POLISHED STAINLESS STEEL – LIMITED LIFETIME
POWDER COATED BLACK – 3 YEARS
Part Description
DRILLING NOT
REQUIRED
Rev 121218
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for TrailFX FHDB006TI
Summary of Contents for TrailFX FHDB006TI
- Page 1 Front HD Bumper Part No. FHDB006TI 2017-Current Ford F250/350 Superduty Fits: ASSISTANCE IS HIGHLY RECOMMENDED 60-180 min CUTTING NOT DRILLING NOT REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. REQUIRED REQUIRED support@trailfx.com READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION.
- Page 2 Left and Right Offset LED Light Brackets (2) License Plate Plugs License Plate Bracket Winch Tray and Bracket Assembly PROCEDURE: REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION. BUMPER IS HEAVY, ASSISTANCE IS HIGHLY RECOMMENDED TO AVOID POSSIBLE INJURY OR DAMAGE TO THE VEHICLE.
- Page 3 NOTE: “L” Brackets may require modification for hardware larger than 8mm or use brackets supplied with light if possible. b. Attach the light and brackets to the top of the (2) tabs on the back of the Bumper with the included 8mm x 25mm Hex Bolts, (4) 8mm Flat Washers, (2) 8mm Lock Washers and (2) 8mm Hex Nuts, (Figure 10).
- Page 4 Tow hook Front (Fig 3) Remove plastic cover around tow hook (Fig 4) Remove bumper bolts (driver side pictured) Front WARNING! Do not remove bumper bolts unless the bumper is properly supported on blocks or stands or the bumper may fall.
- Page 5 Front (Fig 8) Winch Tray Assembly installed Front (Fig 9) Universal LED Brackets (light not included) (2) 8mm x 16mm Hex Bolts (2) 8mm Lock Washers Right “L” (2) 8mm Flat Washers Bracket (2) 8mm x 25mm Hex Bolts (4) 8mm Flat Washers Left “L”...
- Page 6 (3) 10mm Flat Washers (3) 10mm Lock Washers (3) 10mm Hex Nuts (3) 10mm Flat Washers (3) 10mm Lock Washers (3) 10mm Hex Nuts (Fig 13) Attach Bumper to Winch Tray Brackets Front (Fig 14) Driver/left side of Bumper and Bracket...
-
Page 7: Product Care
Ensure make model year, cab length and bed size of your vehicle is listed in the application. All installation steps are followed correctly. www.TrailFX.com Check out these other TrailFX Products!! Keystone Automotive Operations Inc. (KAO) warrants this product to be free of defects in material and workmanship at the time of purchase by the original retail consumer.
Need help?
Do you have a question about the FHDB006TI and is the answer not in the manual?
Questions and answers