Table of Contents
Advertisement
Safety information
EN
Safety warnings
5. Clean up all paint scrapings and dust. Do not sweep,
dry dust or vacuum to avoid the paint dust will be thrown
up into the air where it can be inhaled or contaminate
other areas. Wet mop floors. Use a wet cloth to clean
all walls, sills and other surfaces where paint and dust
have accumulated.
6. Dispose of paint scrapings properly.
7. Do not obstruct either the air vents or nozzle outlet,
as this may cause excessive heat build up resulting in
damage to the product.
8. Do not direct the hot air blast at persons.
9. Do not aim the hot airflow at the same area for prolonged
periods. Working with plastic, paint, varnish or similar
materials may produce easily flammable gases.
10. Safely place the power tool on the storage surfaces
after use and let it cool completely before packing it
away. The hot nozzle can cause damage.
11. Do not leave the switched-on power tool unattended.
12. Keep your work area well-ventilated. The gas and
steam produced during work are often harmful to one's
health.
13. Do not use the power tool as a hair dryer or attempt to
dry pets.
14. The distance between the nozzle and the workpiece
depends on the material you are working on (metal,
plastic, etc.) and the intended working method. Always
test the amount of air and temperature first.
15. If operating the power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
08
by TITAN
TTB935HTG
Advertisement
Table of Contents
