Table of Contents
Advertisement
by TITAN
TTB935HTG
Safety warnings for heat gun
1. The tool must be placed on its stand when not in use.
2. A fire may result if the product is not used with care,
therefore
̛ be careful when using the product in places where
there are combustible materials;
̛ do not apply to the same place for a long time;
̛ do not use in presence of an explosive atmosphere;
̛ be aware that heat may be conducted to combustible
materials that are out of sight;
̛ place the product on its stand after use and allow it
to cool down before storage;
̛ do not leave the product unattended when it is
switched on.
Additional safety warnings for heat gun
1. Keep other people as well as pet out of the working
area during operation and before the work area is
cleaned thoroughly.
2. Do not use the product near flammable liquids or in
explosive atmospheres, such as near fumes, gases or
dust. The flameless heat from the product may ignite
the dust or fumes. Remove materials or debris that
may become ignited from work area.
3. Hidden areas such as behind walls, ceilings, floors,
soffit boards and other panels may contain flammable
materials that may ignite when using the product in
these locations. Ignition of these materials may not be
readily apparent and could result in property damage
and personal injury. Check these areas before applying
heat. If in doubt, use a different method.
4. Keep away from the hot air outlet. This product
releases an air stream of high temperature that can
cause serious burns and personal injury.
Safety information
EN
07
Advertisement
Table of Contents
