Table of Contents
Advertisement
by TITAN
TTB935HTG
You will need
(items not supplied)
Suitable personal protective equipment
Assembly
WARNING! The product must be fully assembled before operation!
Do not use a product that is only partly assembled or assembled with
damaged parts!
Follow the assembly instructions step-by-step and use the pictures
provided as a visual guide to easily assemble the product!
Do not connect the product to power supply before it is completely
assembled!
NOTE: Take care of small parts that are removed during assembly or
when making adjustments. Keep them secure to avoid loss.
Scraper
> Remove the outer nut (7c) from the thread of handle (7b) (Fig. 1).
> Place the blade (7a) on the thread.
> Screw the nut back until the blade is properly fastened.
WARNING! Do not touch the blade as it becomes very hot during
use and remains hot for up to 30 minutes after use.
7a
7c
Fig. 1
(items supplied)
Blade (7a)
Handle (7b)
Concentrator nozzle (8)
Spreader nozzle (9)
Glass protector nozzle (10)
Reflector nozzle (11)
7b
Before you start
EN
15
Advertisement
Table of Contents
