Titan TTB935HTG Manual page 25

by TITAN
TTB935HTG
Bending plastic tubes
> Fill the tubing with sand and seal at both ends, to avoid kinking the tubing
> Heat the tubing evenly by moving it from side to side.
Defrosting taps and tubes
WARNING! Do not attempt to use the product on gas pipes –
Danger of explosion! Before defrosting always ensure that the
pipe you are going to defrost is a water pipe!
> Always heat the frozen zone from the outside to the middle.
> Be careful when applying the heat to plastic pipes to avoid damage.
Operation
EN EN
II
450°C
III
600°C
III
600°C
25