Table of Contents
Advertisement
Using Features
Special
Characters
Headsets
All manuals and user guides at all-guides.com
Features that dial numbers automatically may need special
characters to allow for correct dialing or system response.
Inserts 1 5 second pause in the dial sequence.
Hold
Consecutive pauses are allowed. P appears on the display.
Sends switchhook flash. Must be first entry in
Conf
sequence. F appears on the display.
# #
Used to signal end of dialing sequence for Auto Dial
buttons or to separate grouped digits. The ## appears
on the display.
Trnsfr
Stop
Halts dialing sequence to allow for system
.
response. (Requires manual restart.)
Headsets for 4400-Series telephones allow one-touch operation,
hands-free. The headset plugs into the headset jack. Two
buttons are used for headset operation:
Headset Status. Press
headset and handset operation.
To program:
EXT
7 8 2
Headset Hangup. Press
The Headset/Hangup button is programmed by your System
Manager.
Headset Status
+ lift handset +
#
0 0
+
.
Headset /Hangup
to switch between
#
0 0
+
Headset Status
to disconnect a call.
+
Advertisement
Table of Contents
