Table of Contents
Advertisement
PIT es Set10u-5ns
Fig.: Hole pattern of the mounting plate
}
The housing can be attached to the mounting plate in all four directions. Insert the hous-
ing rotated by 45 ° into the hole of the mounting plate and lock it into place by turning it to
the left or right until you hear it click into place.
Fig.: Mounting of housing on the mounting plate, with mounting bracket
Operating Manual PIT es Set10u-5ns
1004426-EN-01
INFORMATION
After the housing is locked into place in mounted state, it can no longer be
disconnected unless the upper part of the housing is removed (manipulation
protection).
72
58
max. base area housing
| 13
Advertisement
Table of Contents
