Order Reference; Product; Accessories; Mounting Bracket - Pilz PIT es Set10u-5ns Operating Manual

PIT es Set10u-5ns

Order reference

Product

Sets
Product type Features
PIT es Set10u-5ns Set consisting of E-STOP pushbutton active/inactive with flash func-
tion, without logo and without E-STOP symbol, with contact block and
with LED safety printed circuit board in surface mount housing with 5-
pin M12 plug connection, 2 N/C (push-in technology connection)
PIT es Set10u-5ns Set consisting of E-STOP pushbutton active/inactive with flash func-
AIDA tion, without logo and without E-STOP symbol, with contact block and
with LED safety printed circuit board in surface mount housing with 5-
pin M12 plug connection - AIDA PIN assignment; 2 N/C (push-in tech-
nology connection)
Emergency stop pushbutton
Product type Features
PIT es10u E-STOP pushbutton can be activated/deactivated without logo and
without E-STOP symbol
LED safety printed circuit board
Product type Features
PIT EF LED 1 PCB LED safety printed circuit board for PIT es10u
To connect the evaluation device to the E-STOP device, use a 5-pin unshielded cable with
an A-coded M12 female connector (see
cable").
To connect a decentralised module (e.g. PDP67 F 8DI ION from Pilz), use a 5-pin unshiel-
ded cable with an A-coded M12 male connector (for connection to the decentralised mod-
ule) and an A-coded M12 female connector (for connection to the E-STOP device) (see
der reference [

Accessories

Mounting bracket

Product type Features
PIT es box flex Mounting bracket for PIT es box flex
bracket
Operating Manual PIT es Set10u-5ns
1004426-EN-01
Order reference [
24] "Connection cable for connection to decentralised modules").
Order no.
400 461
400 462
Order no.
400 540
Order no.
400 342
24] "Open-ended connection
Order no.
400 220
Or-
| 24