Removing Outdoor Fan - Hisense Hi-FLEXi S Series Technical, Installation, Maintenance

2.9 Removing Outdoor Fan

(1) Remove the air grille according to the item 2.8 "Removing Air Grille".
(2) Remove the closing nut and the flawasher fixing in the propeller fan onto the motor shaft with an box wrench.
(3) Remove the propeller fan from the motor shaft (Lift the propeller fan up). When attaching the propeller fan to the motor
shaft, make the D-Cut at the boss portion connected to the D-Cut of the fan motor shaft.
NOTE:
DO NOT apply an excessive force to the shroud (plastic part) . Otherwise, deformation and breakage may occur.
TURN OFF all the power switches.
Fan Motor
Closing Nut
Flat Washer
Propeller Fan
Shroud
219
Adjustable Wrench, Spanner, Puller,
Tool
Phillips Screwdriver, Nippers, Box Wrench
Adjustable Wrench, Spanner, Puller,
Tool
Phillips Screwdriver, Nippers, Box Wrench
Servicing
Fan Motor
Closing Nut
Flat Washer
Propeller Fan
Shroud