Menu 5 - Service - Nibe F110 Installation Manual

Menu 5 - SERVICE

OVERVIEW
5 - SERVICE 5.1 - operating settings
5.5 - factory setting
5.6 - forced control
5.7 - start guide
5.8 - quick start
Go to the main menu and hold the Back button in for 7
seconds to access the Service menu.
Sub-menus
The menu SERVICE has orange text and is intended for the
advanced user. This menu has several sub-menus.
operating settings Operating settings for the heat pump.
factory setting Total reset of all settings (including settings
available to the user ) to default values.
forced control Forced control of the different components
in the heat pump.
start guide Manual start of the start guide which is run the
first time the heat pump is started.
quick start Quick starting the compressor.
NOTE
Incorrect settings in the service menus can dam-
age the heat pump.
MENU 5.1 - OPERATING SETTINGS
Make settings for the heat pump here.
30 Chapter 8 | Control - Menus
5.1.1 - hot water settings
5.1.5 - fan sp. exhaust air
5.1.5 - fan speed
5.1.15 - air in-temperatures
5.1.16 - installation
MENU 5.1.1 - HOT WATER SETTINGS
economy
Setting range economy start temp: 10 – 53 °C
Factory setting economy start temp: 45 °C
Setting range economy stop temperature: 13 – 56 °C
Factory setting economy stop temperature: 51 °C
normal
Setting range normal start temp: 10 - 53 °C
Factory setting normal start temp: 49 °C
Setting range normal stop temperature: 13 - 56 °C
Factory setting normal stop temperature: 54 °C
luxury
Setting range luxury start temp: 10 – 77 °C
Factory setting luxury start temp: 53 °C
Setting range luxury stop temperature: 13 – 80 °C
Factory setting luxury stop temperature: 58 °C
stop per increase
Setting range: 5 – 80 °C
Default value: 60 °C
Here you set the start and stop temperature of the hot water
for the different comfort options in menu 2.2 as well as the
stop temperature for periodic increase in menu 2.9.1.
NIBE F110