Supplied components
Silencer
Air connection
LOCATION
The kit of supplied items is placed in the lower section of
the product.
Handling panels
REMOVE THE AIR TREATMENT UNIT'S HATCH
1.
Loosen the screws for the securing plates above F110.
2.
Slide the hatch upwards.
3. Pull the hatch towards yourself.
1
3
NOTE
An earth cable is installed in the hatch, which can
therefore only be lifted out 35 cm. If the hatch
needs to be removed completely, the cable must
be disconnected.
8
Chapter 2 | Delivery and handling
Filter cartridge
2
4
REMOVE THE FRONT
1.
Pull the panel towards yourself.
NOTE
A display cable is installed in the panel, it can
therefore only be lifted out 1.5 m. If the panel
needs to be removed completely, the cable
must be detached.
L E K
NIBE F110