thomann Botex LED Stripe All-in-One Control User Manual page 14

Operation
Setting the IR remote control
Resetting the device to factory
defaults
Displaying the firmware version
Displaying the operating hours
LED Stripe All-in-One Control
14
DMX Controller
1.
Open the main menu.
2.
Navigate to 'Setting è IR Remote'.
3.
Use [Up] and [Down] to select 'On' or 'Off' .
4.
Confirm your selection with [Enter].
ð The remote control is activated (On) or deactivated (Off).
1.
Open the main menu.
2.
Navigate to 'Setting è Factory Reset'.
3.
Press [Enter].
4.
'Reset Now' appears on the display
5. Confirm with [Enter].
ð The device is reset to the factory default settings.
1.
Open the main menu.
2.
Navigate to 'System Info è Firmware'.
3.
Press [Enter].
ð The current firmware version is displayed.
1.
Open the main menu.
2.
Navigate to 'System Info è Operation Hours'.
3.
Press [Enter].
ð The operation hours are displayed.