Gear Selector Operation - Segway AT5 S Owner's Manual

GEAR SELECTOR OPERATION

Different operation modes correspond to different gears. After
selecting the gear, check the indicator light on the instrument
panel to ensure that the gear has been switched to the desired
position. See the table below for the position description:
You need to step on the brake pedal and stop the vehicle
when you want to change the gear position.
If you change the gear with the engine in rpm HIGHER than idle
speed, or the vehicle is moving, it can cause transmission
damage. Please place the transmission in parking gear and lock
the parking brake when nobody drives the ATV.
VEHICLE DEVICE
NOTICE
45
L
Low speed
H High speed
N
Neutral
R
Reverse
P
Parking