Table of Contents
Advertisement
●Before wiring, always confirm the rated power voltage of the WGI-400A and terminal arrangement.
Then, conduct wiring in the correct manner.
●Power consumption of the WGI-400A is maximum 6 VA. If it is unavoidably operated in environment
with poor power condition, it is recommended to use an insulated constant voltage transformer or the
like.
●Special care should be taken when using the WGI-400A in environment with excessive vibration. If the
WGI-400A is operated at a location with excessive vibration or with continuous vibration, it may cause
measurement error and/or failure of the instrument.
Take care not to drop it during transportation and avoid applying strong impact.
Or, deterioration of the instrument may result.
●Basically, the WGI-400A is designed to be used by connecting a strain gage transducer to the input
terminal. Do not use transducers other than the above or deterioration of the instrument may result.
●Before cleaning the panel, always turn OFF the WGI-400A and gently clean with a soft cloth. Do not use
paint thinner, benzine, acetone, kerosene or the like.
●Use the WGI-400A by conforming to operating environment specified in this Instruction Manual.
Or, malfunction and/or failure of the instrument may result.
CAUTION
3
Advertisement
Table of Contents
