KYOWA WGI-400A Instruction Manual page 33

Control Output .......................................... The number of points: 3 (HIGH, OK, and LOW)
Analog Output ........................................... Select voltage output or current output
TEDS Function ......................................... Automatic sensitivity registration (Key operation, When power
Power Supply ............................................ AC power supply:
Operating Temperature and
Humidity Range ....................-10 to 50 °C, 20 to 85% (Non-condensing)
Dimensions ............................................... 96(W) × 48(H) × 144(D) mm
Panel cut dimensions............................92.2
Weight ....................................................... Approx. 300 g (Standard type)
Accessories ................................................. Unit seal, Instruction manual, Product warranty
Compliance ................................................. Directive 2014/30/EU (EMC)
Output mode:
Load capacity:
Pattern function:
High/Low limit comparator function:
The number of points: 2 (HGH and LOW)
Setting range: ±9999
Comparison speed: 50 times/sec
Detector function:
The number of point: 1 (OK)
Voltage output:
Current output:
Response speed:
Non-linearity:
Frequency response:
DC power supply:
+0.4
+0.4
(W) × 45.2
0 0
Panel thickness 0.8 to 5.0 mm recommend
Directive 2014/35/EU (LVD)
Directive 2011/65/EU, (EU)2015/863
(10 restricted substances) (RoHS)
29
Open collector (NPN)
30 VDC, 20 mA (Resistance load)
Set 4 sets of high/low limit value,
Selectable from external signal
±10 V (Load resistance 2k ohm or more)
Arbitrarily scaling available
4 to 20 mA (Load resistance 500 ohm or
less)
Arbitrarily scaling available
Approx. 0.25 sec (10 to 90%)
Within ±0.1% FS
Approx. 1 Hz (-3dB±1dB)
ON, RS control)
100 to 240 VAC , 50/60 Hz
Power consumption 6 VA or less
10 to 30 VDC
Power consumption 8 W or less
(H) mm,